Fast, Reliable Spray Foam Insulation Across Enterprise
If your electric bill climbs every July and the upstairs bedrooms never quite catch up, the attic is usually where the answer lives. We install Spray Foam Insulation across Enterprise with a written price before any work starts, and we publish before-and-after blower-door readings so you can see the change in a single number. Enterprise is 89139 country: the 1990s and 2000s stucco tract homes off Blue Diamond and Silverado Ranch, the low-rise apartments near the 215. We know the housing stock here because we work it constantly. Call (833) 630-4008 and a live person answers.
Why Envelope Insulation North Las Vegas Is Enterprise’s Preferred Spray Foam Insulation Company
Enterprise homeowners read the three-star reviews as carefully as the five-star ones, and we respect that. What they find with us is a written scope, a written warranty, and a documented photo record on every visit, not a marketing promise. Under The Haven Standard, we seal first and insulate second, in that order, on every job. We never blow insulation over an unsealed attic floor, and we say so plainly.
The 365-Day Done Right Promise backs all completed work: if it’s not done right, we make it right. Technicians are background-checked, uniformed, and experienced (up to 10 years). Calls are answered by a live person 24/7, never a voicemail loop. For Enterprise specifically, that means fast scheduling windows and a text when the technician is on the way. Bring us a competing estimate and we’ll read it with you under our Free Second Opinion offer.
Our Spray Foam Insulation Services in Enterprise

Closed-Cell Spray Foam in Enterprise
Closed-cell is the right specification for most Enterprise roof decks and wall cavities because it delivers both insulation value and an air barrier in one pass. In 89139’s newer subdivisions, we install it on the roof deck to bring the attic HVAC equipment inside the thermal envelope, which is the only way cooling savings actually show up on the bill. Most closed-cell roof-deck jobs in Enterprise run $3.50 – $6.00 per board foot installed.

Rim Joist Spray Foam in Enterprise
Rim joists are the band of framing where the floor system meets the exterior wall, and in slab-on-grade Enterprise homes they’re frequently left bare. Desert heat radiates through that gap into the living space. We spray a continuous closed-cell layer across the rim, sealing it against air infiltration and reducing hot spots at the interior wall line. A typical rim-joist job in Enterprise runs $650 – $1,400.

Spray Foam Roof Deck in Enterprise
Spraying the underside of the roof deck is how Enterprise homes get the attic HVAC equipment and duct runs inside conditioned space without a full renovation. With summer design temperatures above 110°F, an unsealed roof deck can hit 150°F and cook the ductwork above it. Roof-deck foam changes that equation entirely. Enterprise roof-deck jobs typically run $4,200 – $8,500 depending on square footage and access.

Open-Cell Spray Foam in Enterprise
Open-cell works well in interior wall cavities and in soffit or band areas where vapor permeability matters. It’s softer, lower-cost per board foot, and quieter. For Enterprise attic retrofits where we’re sealing an existing unconditioned space, open-cell is sometimes the right call; more often, closed-cell on the roof deck is. Open-cell in Enterprise typically runs $1.75 – $3.00 per board foot installed.
Trusted Brands We Service in Enterprise
We source spray foam materials from Icynene, Demilec, and CertainTeed, and we pair foam installs with duct sealing upgrades that use products from those same lines. We don’t stock parts locally and we don’t hold inventory on trucks, so turnaround depends on scheduling rather than warehouse availability. Enterprise jobs typically get scheduled quickly because the materials we need are standard stock. No proprietary product lock-in; if a specific brand is specified in your scope, we’ll match it. If not, we’ll recommend the specification that fits the job and explain why in plain terms.
Common Spray Foam Insulation Problems We See in Enterprise Homes

- Fiberglass batts in the attic floor sag after years of 150°F+ attic heat. We routinely find R-19 batts compressed to R-11 in Enterprise tract homes built in the 1990s and 2000s. The result is hot bedrooms in July and August and electric bills that climb every summer.
- Unsealed duct joints in unconditioned attics leak cooled air into the 150°F space. The AC runs continuously trying to keep up, and the insulation deficiency gets masked by the duct loss. We start with a duct-blaster test to find the leaks before we specify foam.
- Rim joists and garage ceilings left uninsulated let desert heat radiate into living spaces. This is a hot-spot problem, not a whole-house problem, and spray foam alone won’t fix it without proper coverage. We map the coverage before the first pass.
- Ductwork and attic air handlers in 89139 subdivisions sit in unconditioned space. Spray foam needs to be paired with duct sealing and, in many cases, a radiant barrier. Otherwise the cooling savings never materialize.
Pricing for Spray Foam Insulation in Enterprise, NV
Honest Enterprise pricing: closed-cell per board foot runs $3.50 – $6.00; open-cell runs $1.75 – $3.00. A standard rim-joist job runs $650 – $1,400. Roof-deck spray foam for a typical 89139 home runs $4,200 – $8,500. Garage ceiling spray foam runs $1,200 – $2,800. Full attic foam-to-deck with duct sealing and radiant barrier adds $1,800 – $3,500 on top depending on duct run count. The variables that move the number: square footage, access, existing insulation to remove, and duct complexity. Every job begins with a written price before any work starts, no exceptions. Estimates are free.
Where spray foam is the right specification, duct sealing and rim-joist work often go in alongside it. A blower-door test before and after gives you the number that shows the result.
Why Spray Foam in Enterprise Is Specified for Cooling, Not Heating

Enterprise sits at the edge of the Mojave Desert, and design temperatures here routinely exceed 110°F. In neighboring Las Vegas neighborhoods with older, less efficient housing stock, the heating load still shapes some insulation decisions. In Enterprise, it doesn’t. Insulation here is specified for cooling load first, and every decision follows from that.
The distinctive wrinkle for 89139: many of the newer subdivisions built during the region’s rapid suburban expansion place HVAC air handlers and ductwork in unconditioned attic spaces. Original attic insulation in these wood-frame, slab-on-grade homes is often R-19 or less, falling far short of current energy code for this climate. Spray foam alone, sprayed to the attic floor, doesn’t fix the duct problem. The foam has to go to the roof deck or the duct system has to be brought inside the envelope, or the cooling savings evaporate into the 150°F attic.
That’s why a typical roof-deck job here begins with a duct-blaster test to locate duct leaks, then applies closed-cell spray foam to the roof deck, then seals all duct joints, then adds a radiant barrier. In Enterprise’s 1990s – 2000s tract homes, this sequence is what actually addresses the extreme cooling load at the envelope, not just the attic floor.
We Also Serve Cities Near Enterprise
If you’re just outside the Enterprise line, we can help. We take on spray foam and attic work throughout Enterprise and in Spring Valley, Paradise, Winchester, and Henderson. Same written-price process, same documented photo record, same before-and-after blower-door readings. The local professionals we connect you with work the whole southeast valley, so scheduling is rarely a bottleneck. Call (833) 630-4008 to confirm your address is covered.
Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Spray Foam Insulation in Enterprise
Spray foam matters more in Enterprise because the design cooling load here exceeds 110°F summer design temperatures, and the 89139 subdivisions place HVAC air handlers in unconditioned attics. That combination makes the foam the air barrier and the insulation at once, which is the only way the extreme cooling load gets managed at the envelope. In neighborhoods with older housing stock, the heating and cooling profiles are different. Call (833) 630-4008 for an exact quote on your Enterprise home; estimates are free.
No, spray foam alone often won’t fix high summer electric bills in Enterprise, because the ductwork and air handler in many 89139 homes sit in unconditioned attic space. Duct leaks dump cooled air into the 150°F attic, and foam at the attic floor doesn’t stop that. The right sequence is duct sealing, foam on the roof deck, and a radiant barrier. Call us for a written scope that reflects that sequence.
Open-cell is softer, less dense, and lower cost per board foot; closed-cell is denser, adds structural rigidity, and provides a vapor barrier in one pass. For Enterprise roof-deck jobs and rim-joist work, closed-cell is usually the right choice because it handles both duties. Open-cell fits interior wall cavities and band areas. Typical Enterprise pricing: open-cell $1.75 – $3.00 per board foot, closed-cell $3.50 – $6.00.
Most Enterprise spray foam jobs get scheduled within a few days of the written estimate, and same-day scheduling is sometimes available depending on the week. The foam materials we use are standard stock, so availability isn’t usually the constraint; access and existing insulation removal are. Call (833) 630-4008 and a live person will give you the real window for your address.
Yes, in many Enterprise homes spray foam requires a ventilation adjustment because moving the thermal envelope to the roof deck changes how the attic breathes. Under the Haven Standard we assess that in the written scope before any work begins; we don’t leave it to discovery. If a mechanical ventilation change is required, it’s written into the price up front. Call us and we’ll walk through what your home actually needs.
Ready for a Written Price on Spray Foam in Enterprise?

Every job begins with a written price, a written scope, and a written warranty, and ends with a documented photo record. Bring us a competing estimate and we’ll read it with you under our Free Second Opinion offer. Call (833) 630-4008 for a free estimate on your Enterprise spray foam job. A live person answers, any hour.
Written by the team at Envelope Insulation Co.