Fast, Reliable Insulation Removal & Replacement Across Enterprise
If your July electric bill keeps climbing while the house never feels cool, the insulation in your attic may be the problem. We handle insulation removal and replacement in Enterprise, and we know this part of the valley well, from the 89139 subdivisions south of the 215 to the older tract homes closer to the airport corridor. When you call, a live person answers, and we can usually get an assessment out to Enterprise quickly. Reach us at (833) 630-4008 for a free estimate and a written price before anything starts.
Why Envelope Insulation North Las Vegas Is Enterprise’s Preferred Insulation Removal & Replacement Company
Enterprise homeowners research carefully, and we respect that. We give you the price on paper and the evidence behind it: a written scope, a written warranty, and a Documented Photo Record from every visit. Our technicians have up to 10 years of experience, and every removal job is background-checked and uniformed so you know who’s on your property. We operate under The Haven Standard, which since 2016 has meant one simple rule: have it in writing, always.
What earns trust in Enterprise isn’t a slogan. It’s that our crews walk the attic and tell you what they actually found, then hand you blower-door numbers that show how much air the home was losing before and after the work. We’ve sealed and insulated 9,000+ homes with that same documented approach. When you ask what happened, you get the readings and the photos, not a feeling.
Our Insulation Removal & Replacement Services in Enterprise

Enterprise’s housing stock runs mostly to 1990s – 2000s stucco-clad tract homes and low-rise apartments, and original attic insulation in many of them is R-19 or less. That’s well short of what a Mojave Desert climate demands. Here’s how we handle the removal and replacement work in Enterprise.
Attic Insulation Removal
We pull out the old blown-in fiberglass with a filtered vac system and bag it out through the access, leaving the attic deck clear for air sealing. In Enterprise homes, that old material has usually settled and compressed after years of 150°F-plus attic summers. We document what comes out, so you can see the condition it was in.
Contaminated Insulation Removal
Dust, rodent debris, and moisture damage all show up in Enterprise attics, especially where ducts and air handlers leak and pull unfiltered air through the space. Contaminated insulation has to come out before anything new goes in; covering it traps the problem. We remove it, then air-seal the top plates and penetrations before we add a single batt.
Vermiculite & Old Insulation Removal
Some older Enterprise homes carry vermiculite or degraded legacy insulation that shouldn’t just be topped off. We remove it under containment, bag it out properly, and explain what we found before proceeding. It’s slower work, but it’s the only way to get a clean envelope back.
Insulation Replacement
Replacement means new material installed to a higher R-value, specified for extreme cooling loads rather than heating. In Enterprise we pair that with duct sealing and a radiant barrier, because the attic HVAC equipment sits in unconditioned space. If you’re weighing costs, our Insulation Removal & Replacement team can lay out the options in writing.
Trusted Brands We Service in Enterprise
We install and work with Rockwool, CertainTeed, Icynene, and Demelec products, sourced from established manufacturers so you’re never locked into one proprietary system. There’s no parts stock we claim to hold locally and no brand we pretend to be preferred with. What we do offer is a written price, a fast turnaround, and materials matched to the job in front of us. When you get an estimate, the brand and the R-value are both named on paper before work begins.
Common Insulation Removal & Replacement Problems We See in Enterprise Homes

- Replacing insulation without fixing contamination. Settled fiberglass carrying dust or pest debris gets reinstalled over rather than removed, and the uneven cooling never goes away. The July and August bills stay high because the real source was never cleared.
- Topping off old R-19 with new batts. Adding material over low-R insulation without air-sealing or duct sealing lets attic heat overwhelm the new layer. You paid for insulation, but the leaks are still there.
- Skipping the radiant barrier. In an attic that regularly hits 150°F, no radiant barrier means new insulation degrades fast and its effective life shortens. That’s a cooling-load reality specific to this part of the valley.
- Leaky HVAC air handlers and ducts. In the 89139 subdivisions, air handlers and ductwork often sit in unconditioned attic space, so leaks pull hot air straight into the supply. Without duct sealing, the cooling savings from new insulation never materialize.
Pricing for Insulation Removal & Replacement in Enterprise, NV
Most full attic insulation removal and replacement jobs in an Enterprise home run between $2,200 and $5,800, depending on square footage, how much old material has to come out, and whether duct sealing and a radiant barrier are included. Removal alone typically lands in the $900 – $2,000 range. New insulation installed to a higher R-value generally runs $1,400 – $3,200, and duct sealing plus a radiant barrier add $600 – $1,800. Larger homes and heavier contamination push toward the top of those ranges. You get a written price before any work starts, and a free second opinion on any estimate you bring us.
We Also Serve Cities Near Enterprise

We work throughout the south and west valley, including Enterprise and the surrounding communities of Spring Valley, Paradise, Winchester, and Henderson. The climate and housing stock shift a little from one to the next, and we adjust specs accordingly. If you’re just outside Enterprise, call and we’ll confirm coverage for your block.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Insulation Removal & Replacement in Enterprise

Because in most Enterprise homes the air handler and duct runs sit in unconditioned attic space that can exceed 150°F, so leaky ducts pull that heat straight into your supply air. New insulation on the attic floor does little for the cooling bill if the ducts above it are still leaking. We seal the ducts and air handler as part of the job. Call (833) 630-4008 to schedule an assessment.
Contamination usually shows up as dark staining, pest droppings, moisture clumps, or a musty smell, while plain age looks like settled, compressed material with no debris. In Enterprise attics, years of extreme heat cycling and leaky ducts often combine the two. We inspect and photograph what we find so you can see the difference before deciding. Call us for an exact quote – estimates are free.
Usually not. Uneven cooling in Enterprise typically traces back to air leaks and unsealed ducts, not just low R-value, so insulation alone leaves hot spots in rooms farthest from the air handler. The fix is sealing first, then insulating. We measure the result with a blower-door test and hand you the before-and-after numbers. Call (833) 630-4008 to get started.
For Enterprise’s cooling-dominated climate, we typically specify well above the original R-19 many of these homes were built with, aiming for the range current energy code calls for in this climate zone. The exact number depends on your attic configuration and ducts. We put the target R-value in writing before work begins. Call (833) 630-4008 for a free estimate.
We can often get an assessment out to Enterprise quickly, and a live person answers the phone 24/7 so you’re not stuck in a voicemail loop. Scheduling for the actual removal work depends on scope, but we give you the timeline in writing. Bring us a competing estimate and we’ll read it with you, no charge. Call (833) 630-4008.
If your Enterprise attic is overdue for removal and replacement, call us today at (833) 630-4008 for a free estimate. You’ll get a written price before any work starts, a Documented Photo Record when we finish, and before-and-after blower-door numbers so you can see exactly what changed.
Written by the team at Envelope Insulation Co.