Fast, Reliable Wall Insulation Across Enterprise
If a west-facing bedroom in your Enterprise home runs five degrees warmer than the hallway every July, the wall behind that drywall is the reason. We know the housing stock here: the stucco tract homes and low-rise apartments built through the 1990s and 2000s, the R-19-or-less batts the builders left in the walls, and the way 110°F design temperatures turn those thin cavities into the weak point of the whole envelope. Our technicians have up to 10 years of experience, and we connect you with independent local pros who work in the 89139 ZIP every week. Call (833) 630-4008 for a free estimate.
Why Envelope Insulation North Las Vegas Is Enterprise’s Preferred Wall Insulation Company
Enterprise homeowners research before they call, and we write for that. Every job starts with a written price, a written scope, and a written warranty before anyone lifts a tool – that’s Haven Standard Clause 1, and it’s the reason a homeowner in the 89139 subdivisions can compare two quotes line by line instead of guessing. After the work, you get a Documented Photo Record of the cavities, the penetrations, and the finished patch, whether or not you ask for it.
We publish before-and-after blower-door numbers on applicable jobs – a pressurization reading that shows, in a single figure, how much conditioned air the home was losing before sealing and after. On the wall and envelope work where that measurement applies, you see the change you paid for. The 365-Day Done Right Promise backs every completed job: if it’s not done right, we make it right. Independent local professionals perform the work in Enterprise, and they’re licensed and insured as Nevada requires. A live person answers calls 24/7, and the response time to Enterprise is same-day in most cases.
Our Wall Insulation Services in Enterprise

Drill & Fill Wall Insulation
For Enterprise’s 1990s – 2000s stucco tract homes, drill-and-fill is usually the right call from the exterior. A qualified pro verifies the cavity with a thermal scan or a small test hole, then drills through the stucco, dense-packs the cavity, and patches and re-stuccos each penetration so the wall matches when it’s done. The sun-exposed south and west walls are where this pays off first in Enterprise. A typical drill-and-fill job here runs $2,200 – $4,800 depending on wall square footage and stucco repair.
Injection Foam Wall Insulation
When the cavity has settled fiberglass with empty bands at the top, injection foam fills the void instead of layering over it. We use Icynene and Demilec foams, sourced through our material partners, and the installer checks density as the cavity fills – foam that’s under-filled just sags again in Enterprise’s summer heat. Most wall jobs on a single-story Enterprise home fall in the $3,000 – $6,500 range including prep and patch.
Exterior Wall Insulation
Some Enterprise walls need the assembly rebuilt, not just filled: a wall with failed sheathing or a stucco layer that’s already been re-patched twice is a candidate for rigid board and a new cladding layer. We spec this with Owens Corning and GreenFiber products and never a proprietary lock-in, so the next contractor can service it. Expect $4,500 – $9,000 for a full exterior wall rebuild on a typical 1,500 – 2,000 sq ft Enterprise home.
Interior Wall Soundproofing
Low-rise apartments along the 89139 corridors were often built with hollow interior partitions, so a bedroom shares a stud bay with the hallway and every conversation crosses. Dense-pack fiberglass in those cavities cuts the transfer without adding wall thickness. Most single-partition soundproofing jobs in Enterprise come in at $900 – $2,400.
Trusted Brands We Service in Enterprise
We source from Owens Corning, Icynene, Demilec, and GreenFiber, and we don’t stockpile product or hold inventory in Enterprise – materials get ordered to the job. That means we’re not steering you toward whatever sits in a warehouse this month; the spec follows the wall, the climate, and the cavity condition. Brand choice is written into the scope before work starts, and no single manufacturer locks the assembly. If you have a competitor’s quote that names a different product line, the Free Second Opinion lets us read it with you and tell you whether the spec fits an Enterprise wall.
Common Wall Insulation Problems We See in Enterprise Homes

- Settled batts in stucco cavity walls. Builder-grade fiberglass in 1990s – 2000s Enterprise tract walls sags and thins over the decades, leaving uninsulated bands at the top and bottom of the cavity. Under 105°F+ sun, those bands show up as hot west- and south-facing rooms that never catch up with the thermostat.
- Wall work done alone, with duct losses still open. Most Enterprise homes in 89139 have attic HVAC air handlers and duct runs in unconditioned space. Upgrade the walls without sealing the ducts and adding a radiant barrier, and the cooling savings get eaten before they reach the room.
- Hollow interior partitions in low-rise apartments. Soundproofing was never installed in many of these units, so bedroom-to-hallway noise passes through an empty stud bay. Dense-pack fiberglass closes that gap.
- Patched stucco with no cavity behind it. We find exterior wall sections that were re-stuccoed over a cavity that was never insulated in the first place – the patch looks solid and the wall is still empty. A thermal scan finds it before anyone drills.
Pricing for Wall Insulation in Enterprise, NV
Most wall insulation jobs in Enterprise run between $1,800 and $6,500, and the number moves with wall square footage, cavity condition, stucco repair, and whether the job touches one exposure or the whole envelope. Drill-and-fill on a typical single-story home is $2,200 – $4,800. Injection foam runs $3,000 – $6,500. Interior soundproofing on one partition is $900 – $2,400. Every price is written before anyone lifts a tool, and you get a written scope and written warranty with it. Bring a competing estimate and we’ll read it with you as a free second opinion. Call (833) 630-4008 for an exact written price.
We Also Serve Cities Near Enterprise

We work across the surrounding valley: Spring Valley, Paradise, Winchester, and Henderson. The housing stock shifts block by block and so does the spec, which is why we treat Wall Insulation in Enterprise as its own scope rather than a copy of a neighboring city’s. See our full Wall Insulation service line for the assemblies we install.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Wall Insulation in Enterprise

Because the walls are already stucco-clad and finished inside, drilling from the exterior keeps the drywall, paint, and trim untouched. A pro verifies the cavity with a thermal scan or small test hole, fills from the stucco side, then patches and re-stuccos each penetration so the wall matches. Interior access would mean cutting finished drywall room by room, and most Enterprise homeowners prefer to avoid that. Call (833) 630-4008 and we’ll tell you which approach your wall condition calls for.
Often it will, but only if the attic HVAC ducts and the radiant barrier are addressed in the same job. In Enterprise’s 89139 subdivisions, air handlers and duct runs sit in unconditioned attic space where temperatures climb past 150°F, so wall upgrades alone rarely show on the July and August bill. Seal the ducts, add the barrier, then fill the walls, and the cooling savings reach the room. Call (833) 630-4008 to scope the full envelope.
In most cases yes for a single-exposure job such as one or two walls or a single interior partition. Full-envelope drill-and-fill across a whole home usually takes a day plus a return visit for stucco patch and cure. We’ll tell you the schedule when the written price goes out, before any work starts. Call (833) 630-4008 for same-day availability in 89139.
Dense-pack fiberglass in the hollow stud cavity is the practical choice for most Enterprise low-rise apartments. It cuts the sound transfer without adding wall thickness or altering the unit’s finishes. Injection foam can work too when the cavity geometry fights the fiberglass, and the choice is written into the scope. Call (833) 630-4008 for a quote on your partition.
Heat degradation is the governing factor here, so the spec has to hold at sustained attic and wall temperatures well above what milder climates demand. That’s why we source Owens Corning, Icynene, Demilec, and GreenFiber with the assembly’s temperature exposure written into the scope. Blown-in fiberglass and radiant barriers degrade faster in Enterprise’s climate than in milder markets, and the wall spec has to account for it. Call (833) 630-4008 to discuss the right assembly for your home.
Ready to stop guessing which wall is the problem? We’ll write the price, document the cavities, and hand you a record when the crew leaves. Call (833) 630-4008 for a free estimate on wall insulation in Enterprise.
Written by the team at Envelope Insulation Co.