Reflectix Wall Insulation in North Las Vegas: What to Know First
Reflectix radiant barrier and reflective foil products are not a substitute for wall cavity insulation, and in North Las Vegas we regularly find them installed as if they were. Most Reflectix wall jobs we take on run one to two days, and our written price lands in the $1,400 to $4,800 range before we lift a tool – the exact figure is fixed in writing after the walk-through, never estimated on the phone. This page is for owners of North Las Vegas homes built between 2015 and 2025 who have Reflectix product in their walls and want to know what’s actually behind the drywall, what it will cost to fix, and what proof they’ll get when we’re done. Call (833) 630-4008 and a live person answers, day or night.
How Reflectix Products Fail – and How We Fix Them
Reflectix is a reflective product: it works by bouncing radiant heat back, and it depends on an air space on at least one face to do that. When it’s stapled tight against a wall cavity, sandwiched between drywall and studs, or buried under fiberglass batts, the reflective surface does nothing and the wall cavity loses its effective R-value. These are the five failures our technicians see most in North Las Vegas, and how we handle each.
- Double-bubble radiant barrier installed with no dead air space. Reflectix’s double-bubble foil lines (R-21 Double Bubble and its Single Bubble undercoat are the most common in our service area) only perform at their rated R-value when they face a cavity of at least three-quarters of an inch. Stapled flat against the drywall, that R-value drops toward zero. We measure the air gap during diagnostics and, where there isn’t one, we reorient or replace the product with cavity insulation that doesn’t depend on a gap to work.
- Reflective foil buried under fiberglass batts. In retrofit work we find builders who faced walls with Reflectix and then packed standard batts on top. The foil traps heat it can’t reflect out, and moisture has nowhere to go. The fix is removal of the buried foil and a proper insulated cavity.
- Wall cavity compression behind the product. Reflectix foil-backed rigid panels (the R-3 and R-5 panel lines) are sometimes nailed to studs and then covered with drywall in a way that compresses the product’s foil layer against framing. The foil creases, the radiative surface fails, and you get a hot wall. We test with a thermal camera before opening anything so we know which walls are actually failing.
- Foil over unsealed plumbing and electrical penetrations. Reflectix is vapor- and air-tight in one direction. Stapled over an unsealed penetration, it traps the leak and lets it condense. This is the one failure mode North Las Vegas homeowners actually feel: walls that sweat in July and August and smell musty by October. Air sealing comes before any insulation goes back in.
- Foam board glued directly to masonry in older Las Vegas-area construction. Some early-2000s builds used Reflectix-branded foam board on the interior of exterior masonry walls. Glue failure and moisture wicking show up first at the base of the wall. We remove the failing board, treat the moisture source, and refit.
Our Reflectix Wall Insulation Process

- 1
Diagnostics first. We walk the walls with a thermal camera and a moisture meter and confirm the problem before we ask you to open a wall. If the issue is acceptable for the existing Reflectix to stay, we tell you that and don’t sell the job.
- 2
Written price and written scope before any work. Haven Standard Clause 1: a flat price, a written scope, and a written warranty, delivered before a technician touches a tool. The document names which Reflectix lines we’re removing and which cavity insulation is going back in, and where.
- 3
Parts decision – OEM or quality aftermarket, disclosed. We source from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber – no proprietary lock-in. Where Reflectix spec calls for an OEM-facing product and we can’t get it, we tell you in writing before the job starts.
- 4
Air seal, then insulate, in that order. We never blow or inject insulation over an unsealed wall cavity. Top plates, penetrations, and any weep points get sealed first – the air sealing is a prerequisite, not an upsell.
- 5
Blower-door test before and after. A pressurization reading that shows, in one number, how much air your envelope was losing before and after the job. The readings go into your file and appear on your paperwork.
- 6
Documented Photo Record and 365-Day Done Right Promise. Every wall we open, every product we remove, every cavity we insulate is photographed, and the photos are delivered – not available on request. If anything isn’t right inside 365 days, we make it right.
What Reflectix Wall Insulation Costs in North Las Vegas
Reflectix wall work is priced by the wall, not by the brand. These are the ranges our North Las Vegas crews see in homes of this vintage.
| Scenario | Typical Price |
|---|---|
| Interior wall cavity – drill & fill, single wall, 100-200 sq ft | $1,400 – $3,100 |
| Exterior wall – injection foam or dense-pack behind the Reflectix | $2,200 – $4,800 |
| Reflectix removal and replace with cavity insulation, single room | $1,800 – $3,600 |
| Whole-house interior wall envelope | $4,800 – $11,000 |
| Interior wall soundproofing (dense-pack the shared wall) | $900 – $2,400 |
What moves the price: whether walls need to be opened (drywall repair adds cost), how much of the Reflectix is buried and must be removed, whether the wall is masonry or framed, and whether air sealing is deeper than standard penetrations. A Free Second Opinion on any written estimate – bring us a competing quote and we’ll read it with you.
Why North Las Vegas Homeowners Call Envelope Insulation North Las Vegas for Reflectix Work

We are an independent Reflectix service provider. We’re not affiliated with or authorized by Reflectix, and we don’t pretend to be. What we do is tell you, in a written price and a written scope, what we found, what we’ll remove, what we’ll install, and what it costs. Our technicians have up to 10 years of experience reading Reflectix installations in North Las Vegas homes and know which lines are performing and which are dead foil. Under The Haven Standard, calls are answered by a live person 24/7 – no voicemail loops, no callback windows. We’ve sealed and insulated more than 9,000 homes since 2016, each with a written price up front and a documented record when the crew left. If Reflectix is in the walls of your North Las Vegas home, we’ll tell you what it’s actually doing.
FAQs
Not necessarily, but it can – and this is where owners get surprised. Reflectix’s own installation literature requires an air space on at least one face of the reflective product, and covering it with blown or injected insulation removes that air space. In most cases our technicians remove the failing Reflectix rather than cover it, which avoids the warranty question altogether and restores the cavity’s actual R-value. As an independent service provider we honor the Reflectix install specs but we don’t represent Reflectix. Call (833) 630-4008 and we’ll look at your situation.
For most wall jobs, no – and we say so before the job starts. Reflectix double-bubble and foil-panel lines are regional distribution items in North Las Vegas, and the exact series installed in your home may not match what’s available today. Where we can’t get an exact OEM match, we tell you in writing what aftermarket product is going in and why, and you decide. Our material sourcing covers Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber – but we’re also happy to briefly note that other radiant-barrier brands show up in this market, and the same air-space rule applies to them.
Usually replace – Reflectix can’t be repaired in place once the foil has creased or the product has been buried under batts. Where the product is intact and the failure is unsealed penetrations or missing air space, we sometimes recommend keeping the Reflectix and correcting the install, which runs $400 to $1,200 in most North Las Vegas homes. Where the foil is compromised or compressed, replacing the cavity with dense-pack or injection foam is the only fix that restores the wall’s actual R-value, and that’s the $1,400 to $4,800 range above. Call (833) 630-4008 for a written price – not a range read over the phone.
Same-day diagnostics are often available in North Las Vegas; same-day full wall work rarely is, because we don’t open walls without a written scope in your hands first. The typical timeline is diagnostic walk-through within 24 to 72 hours, written price within the same visit, and install scheduled once you sign. Calls are answered by a live person 24/7, and the diagnostic visit includes a Documented Photo Record. Call (833) 630-4008 to get on the schedule.
Yes, and we show you the number. On every applicable job we run a blower-door test – a pressurization reading that shows, in a single figure, how much conditioned air the home was losing before and after the work – and we publish the before-and-after readings in your file. North Las Vegas homeowners in this cohort often see the reading drop by 35% to 55% on wall-only jobs once the Reflectix is properly addressed and air sealing is done first. The 365-Day Done Right Promise backs the result: if it’s not right within a year, we make it right. Call (833) 630-4008 for a free estimate.
Written by the team at Envelope Insulation North Las Vegas, serving North Las Vegas and nearby areas.