Fast, Reliable Blown-In Insulation Across Las Vegas
Most blown-in insulation problems in Las Vegas aren’t moisture problems. They’re heat problems. Years of 150°F attic cycling settle and compact the material unevenly, so attic insulation that looks fine from the hatch is often half the depth it should be, drifted away from the eaves, and sitting above duct runs that leak enough hot air to erase the R-value you paid for. We connect Las Vegas homeowners with independent local insulation professionals who treat this as the real failure mode, measure existing depth bay by bay, and check the ducts before blowing in new material. If you’re in 89128, 89130, 89108, or 89149, call (833) 630-4008 and we’ll get a written price in front of you before anyone touches the attic.
Why Envelope Insulation North Las Vegas Is Las Vegas’s Preferred Blown-In Insulation Company
Our reputation in Las Vegas rests on one thing: we never blow insulation over an unsealed attic floor. Air sealing of top plates, can lights, and penetrations is completed before any material goes in, and on every applicable job the before-and-after blower-door numbers are published, so you can see in a single figure how much conditioned air the home was losing before the work and after.
Homeowners across the northwest valley and the older central and east valley ranch stock come to us because the process is documented from front to back. Under The Haven Standard, which has governed every job since 2016, you get a written price before any work starts, a written scope, and a written warranty. On the visit itself, every home leaves with a Documented Photo Record, included automatically rather than on request. That’s 9,000+ homes sealed and insulated, each one with a written price before work and a documented record when the crew left.
The 365-Day Done Right Promise stands behind all completed work, and a live person answers the phone 24/7. Bring us a competing written estimate and we’ll read it with you as a free second opinion. Our technicians have up to 10 years of experience, and the local pros who perform the work in Las Vegas are licensed and insured as their state requires. Call (833) 630-4008 for a free estimate.
Our Blown-In Insulation Services in Las Vegas

Blown-In Fiberglass
Blown fiberglass is the workhorse in Las Vegas tract homes, and it’s what most builder-grade attics were filled with originally. Fiberglass resists UV degradation well and doesn’t hold moisture, which matters less here than heat gain but still keeps the material stable. We top up to a desert-appropriate R-value sized to the measured depth, not the original builder spec.
Blown-In Cellulose
Cellulose packs denser than fiberglass, so it resists the settling that plagues loose fill under 150°F cycling. It’s a strong choice for northwest valley homes in 89149 and 89130 where the attic sees the most intense daily swing. We install cellulose sourced from GreenFiber for even coverage across the bays.
Dense-Pack Wall Insulation
Dense-pack insulation goes into wall cavities at higher density than attic fill, which helps with the intense sun on west- and south-facing walls. That solar load, not R-value alone, decides how a Las Vegas wall performs through a long string of 110°F+ days. Existing wall cavities can often be filled without opening the interior.
Blown-In Top-Up
Most Las Vegas attics need a top-up rather than a full replacement. That means re-measuring depth bay by bay, sealing the top plates and penetrations first, and then adding material to reach the right R-value. If duct joints are leaking in the superheated attic, we address those before the top-up so the new depth actually does its job. See our full Blown-In Insulation service lineup for what each method covers.
Trusted Brands We Service in Las Vegas
We install materials from Owens Corning, Johns Manville, Knauf, GreenFiber, and CertainTeed, and we don’t lock you into a proprietary product. That means the right material for a specific attic in Las Vegas, not the only one we happen to carry. We don’t claim to stock parts or material on trucks, because the independent local pros handle sourcing per job. Turnaround on a written estimate and a scheduled visit is fast. When you compare quotes, check whether the numbers include air sealing and duct inspection, because the material brand alone won’t determine your result. We’ll read a competing estimate with you at no charge.
Common Blown-In Insulation Problems We See in Las Vegas Homes

- Settled and compacted fill after years of 150°F attic cycling. Builder-grade fiberglass in northwest valley tract homes often settles to half its original depth, so a top-up sized by the original R-value comes out short. The depth has to be re-measured bay by bay.
- Loose fill drifted and scuttled away from the eaves. The hottest perimeter areas end up with thin coverage even when the center of the attic looks adequate. That thin band is where heat gain shows up first.
- Leaking attic duct runs that overwhelm a new R-value. Ducts sitting in 150°F attic air often leak at the joints. New insulation goes in, and the home still loses cooling because the leakage was never sealed.
- Older central and east valley ranch stock with thin original coverage. The 1960s – 70s homes carry original insulation that was thin by any standard, and copper or PEX plumbing in those same hot attics. That combination calls for sealing before any top-up.
Pricing for Blown-In Insulation in Las Vegas, NV
Here are real numbers for the Las Vegas market, not a “call for pricing” answer. A blown-in attic top-up in a typical Las Vegas home runs roughly $1,600 – $3,200 depending on square footage and target R-value. A full attic blow-in on a bare floor runs $2,400 – $4,800 for most 1,500 – 2,500 sq ft homes in ZIPs like 89128 and 89108. Dense-pack wall insulation runs about $2.50 – $4.50 per square foot of wall. Air sealing before insulation adds roughly $600 – $1,400, and it’s the step that makes the new material work. Duct sealing and a radiant barrier, which in Las Vegas often comes first, add their own line. Every job starts with a written price and a written scope. Estimates are free, and a second opinion on a competing estimate costs nothing. Call (833) 630-4008 for an exact quote.
We Also Serve Cities Near Las Vegas

We connect homeowners with independent local pros across Las Vegas and the surrounding valley: Winchester, North Las Vegas, Sunrise Manor, and Paradise. If your attic sits in any of these, the same heat-cycling and settling issues apply. Call (833) 630-4008 and we’ll get a written price in front of you before any work begins.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Blown-In Insulation in Las Vegas

For a Las Vegas attic, blown-in insulation should reach a depth that supports R-38 to R-49, which usually means 12 to 16 inches of fiberglass or 10 to 13 inches of cellulose. In practice, the number that matters is the measured depth across several bays in your attic, because settling is uneven and a single center reading can mislead you. A qualified local pro measures bay by bay against a desert-appropriate target R-value. Call (833) 630-4008 for a measured free estimate.
Because years of 150°F attic cycling settle and compact blown-in material unevenly, so the depth you see now is often half the original install. In Las Vegas, this isn’t a moisture problem; it’s a heat problem. Loose fill also drifts away from the eaves under the daily swing, leaving the hottest perimeter areas thin. Honest answer: re-measure before you top up. Call (833) 630-4008 and we’ll walk the attic with you.
Seal and inspect the ducts first, then add insulation. In a Las Vegas attic, duct runs sitting in 150°F air often leak at the joints, and that leakage overwhelms even a newly upgraded R-value before the new material is effective. Our local pros check the duct joints before any top-up so the depth you pay for translates into real performance. Call (833) 630-4008 to get a written scope in the right order.
Yes. Blown-in cellulose works well in Las Vegas because it packs denser than fiberglass and resists the settling that plagues loose fill under heat cycling. Moisture concern is minimal here, so cellulose’s desert weakness (soggy fill) barely comes into play. It’s a strong choice for northwest valley attics. We install cellulose sourced from GreenFiber and CertainTeed. Call (833) 630-4008 for a free estimate on a cellulose top-up.
Top up when the existing material is dry and free of contamination but below target depth; replace when it’s been contaminated, damaged by rodents, or compacted so badly that coverage can’t be leveled. Most Las Vegas attics fall in the top-up category. The honest sequence is air sealing and duct inspection, then a measured top-up to the right R-value. Call (833) 630-4008 and we’ll spell out which one your attic needs with a written price before any work starts.
Written by the team at Envelope Insulation Co.