Fast, Reliable Blown-In Insulation Across Boulder City
If you own one of the original bungalows on the grid near Nevada Way, there’s a good chance your attic has bare ceiling joists and no insulation at all. We know Boulder City’s housing stock the way few do: federal-built 1930s cottages, cinder-block ranchers, stucco-over-tile walls with no cavity to blow into. That changes how the work gets done. Most Boulder City jobs get a written flat price before anyone lifts a tool, and our technicians have up to 10 years of experience reading exactly these homes. Call (833) 630-4008 to start.
Why Envelope Insulation North Las Vegas Is Boulder City’s Preferred Blown-In Insulation Company
Boulder City homeowners research before they call. We’ve built our reputation here by doing the opposite of a hard sell: air seal the attic floor first, then insulate, and hand you the numbers that prove the difference. On applicable jobs we publish before-and-after blower-door readings – a pressurization measurement that shows, in one figure, how much conditioned air a home was losing before the work and after. That’s a harder claim to fake than a testimonial.
Under The Haven Standard, every job starts with a written price and written scope, includes a Documented Photo Record, and closes with a live person answering your call. We’ve sealed and insulated 9,000+ homes since 2016, each one with a written price before work started. Response to the 89005 and 89006 ZIPs is scheduled same-day where the scope allows. And the 365-Day Done Right Promise holds for a full year – if it’s not done right, we make it right. Bring us a competing quote and we’ll read it with you, free.
Our Blown-In Insulation Services in Boulder City

Blown-In Cellulose
For sun-baked attics in the 89006 ZIP, loose-fill cellulose is the workhorse. It packs enough density to slow the heat that drives through a 1930s roof deck by mid-July, and it’s one of the most cost-effective ways to add R-value over bare joists. We use GreenFiber among other brands so you’re not locked into a single maker.
Blown-In Fiberglass
Fiberglass is the lighter, dust-free option and the right call in homes where the attic will be accessed often. In the older Boulder City cottages where the roof pitch is low, it lets us hit a high R-value without stressing the framing. Fiberglass from CertainTeed or Johns Manville installs cleanly over a sealed attic floor.
Dense-Pack Wall Insulation
This is where Boulder City gets tricky. Many framed walls from the 1930s were built with no cavity – single-wall or solid masonry – so dense-packing works only where a stud cavity actually exists. Where it does, we blow it to a dense pack so it won’t settle; where it doesn’t, we say so and talk through exterior or interior options. For stucco-over-tile walls, the wrong approach cracks plaster. We don’t do the wrong approach.
Blown-In Top-Up
A top-up on a later cinder-block or ranch home means adding fill over existing insulation to reach a higher R-value after we’ve sealed the penetrations. Old attics settle and lose depth over decades, so a top-up in Boulder City is often a matter of restoring what was lost plus adding margin for the desert summers.
Trusted Brands We Service in Boulder City
We install materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber – the names that show up on spec sheets, not proprietary house brands. That means you can price-compare the product itself. We hold no stock on site and don’t claim to be a manufacturer’s preferred dealer; what we do is order for your scope and install on schedule. If a Boulder City job calls for a specific material to satisfy design review, we name it in the written scope before anyone starts.
Common Blown-In Insulation Problems We See in Boulder City Homes

- Attics that were never insulated. The original 1930s bungalows were built with bare ceiling joists, so peak summer heat has a straight path into the living space. In these homes, the job isn’t a top-up – it’s installing insulation for the first time.
- Solid masonry and single-wall construction with no cavity. Standard blown-in methods need a void to fill. Push loose fill or dense-pack into a wall with no cavity and you get cracked plaster and pockets of air, not insulation. We check the wall assembly before recommending a method.
- Historic design review blocking exterior retrofits. Boulder City’s core is a federally recognized historic district, the first chartered in Nevada. Exterior rigid board or a vent change that alters the visible facade can be rejected at review, which forces a different and sometimes costlier plan.
- Sun-baked attics failing first. At roughly 2,500 feet on the Colorado River edge, summer highs near 105-115°F and intense UV cook an uninsulated attic faster than anything else in the house. That’s where the comfort problem starts.
Pricing for Blown-In Insulation in Boulder City, NV
Here’s what the work actually runs in this market, so you can plan. A blown-in attic job on a typical 1,200-1,500 sq ft Boulder City home runs about $1,600-$3,200, depending on target R-value and how much air sealing is needed first. A dense-pack wall retrofit where cavities exist runs $2.50-$4.50 per square foot of wall. A simple top-up on a later ranch or cinder-block home runs $700-$1,400. What moves the number: square footage, R-value, whether the attic needs air sealing before fill, and whether historic design review changes the wall approach. Every job gets a written flat price before work starts. Call (833) 630-4008 for a free estimate.
On the oldest 1930s bungalows, insulation is a cavity-retrofit problem, not a top-up. That’s the difference between a Boulder City job and one in a newer metro suburb.
We Also Serve Cities Near Boulder City

We work across the region, not just Boulder City. If you’re just outside the grid, we also serve Blown-In Insulation in Boulder City and the surrounding communities of Henderson, Whitney, Paradise, and Enterprise. Same written price before work starts, same Documented Photo Record. If you’re unsure whether your address falls in our coverage, call and we’ll tell you straight.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Blown-In Insulation in Boulder City

Sometimes, and sometimes not. If the wall has a framed cavity, dense-pack works well. If it’s solid masonry or single-wall construction with no cavity – common in the original federal-built bungalows – standard blown-in can’t go in, and we’ll talk through exterior or interior options instead. Call (833) 630-4008 to set an inspection.
It can, yes. Boulder City’s core is a federally recognized historic district, so exterior changes that alter the visible facade of an original bungalow – exterior board, vent changes – may need to pass design review. Interior attic and cavity work usually doesn’t. We flag anything that needs review in your written scope before work starts.
We typically aim for R-49 to R-60 in attics here. Summer highs near 105-115°F and intense UV mean an uninsulated or under-insulated attic drives heat straight into the living space. A high R-value buys you a cooler house and lower cooling loads. We’ll tell you the target R-value for your attic in your written estimate.
The block wall itself has no cavity to fill, so the leverage is in the attic and any framed additions. On block homes we concentrate on sealing and insulating the attic floor to a high R-value, and we’re upfront that the block walls won’t take blown-in fill. Call (833) 630-4008 for a scope tailored to the block construction.
We install from GreenFiber, CertainTeed, Johns Manville, Owens Corning, Knauf, and Rockwool, among others. We don’t stock parts and don’t claim preferred-dealer status with any maker – we order for your scope and name the material in writing. Call for a free estimate and we’ll recommend the right product for the job.
Ready for a Cooler Boulder City Home? Call Us
Whether you’re in a 1930s cottage inside the historic district or a cinder-block ranch off the main grid, the first step is the same: a written price and a written scope before anyone lifts a tool. We’ve put in the work on thousands of homes since 2016, and we’ll do it right in Boulder City. Call (833) 630-4008 for a free estimate – a live person answers, and a documented record is what you walk away with.
Written by the team at Envelope Insulation Co.
