Fast, Reliable Attic Insulation Across Sunrise Manor
If your west-facing rooms run hot all afternoon even with the AC at full tilt, your attic insulation is probably the reason. In Sunrise Manor, the problem is rarely a lack of insulation but insulation that has spent years baking under 140°F-plus attic temperatures and no longer performs at its labeled R-value. We work 89110 and the surrounding blocks regularly, and most Sunrise Manor jobs start the same way: a written price, an attic inspection with a photo record, and a clear scope for air sealing and ventilation before any new material goes in. Call (833) 630-4008 and a live person answers, day or night, to set up a free estimate.
Why Envelope Insulation North Las Vegas Is Sunrise Manor’s Preferred Attic Insulation Company
We operate under The Haven Standard, which means every job starts with a written price and written scope before anyone lifts a tool, and closes with a Documented Photo Record you keep. For Sunrise Manor homeowners, that documentation matters, because it shows exactly what the builder left you and what we changed. On applicable jobs, we also publish before-and-after blower-door numbers: a pressurization reading that shows, in a single figure, how much conditioned air your building envelope was losing before the work and after.
We’ve sealed and insulated more than 9,000 homes since 2016, and we bring the same discipline to Sunrise Manor tract and master-planned homes in 89110. The 365-Day Done Right Promise backs every completed job, and a Free Second Opinion on any written estimate means you can bring a competing quote and we’ll read it with you. Our technicians average up to 10 years of experience, and they show up background-checked and identified. When we talk about Sunrise Manor, we mean the actual neighborhood: the 1960s – 70s block-and-stucco streets and the later two-story tract subdivisions off the major east-side arterials, houses we’ve been inside enough times to know the patterns.
Our Attic Insulation Services in Sunrise Manor

Sunrise Manor’s housing stock is almost entirely single-family: older single-story stucco-over-CMU homes next to 1980s – 2000s two-story wood-frame subdivisions, most with vented attics and original fiberglass batts. Slab-on-grade construction is near-universal here, so there’s no basement to insulate. The entire envelope fight happens in the attic and against the exterior stucco walls. Here’s how our Attic Insulation team handles the three job types we see most in Sunrise Manor.
Attic Insulation Top-Up in Sunrise Manor
Top-ups are the dominant job in Sunrise Manor, not new installs. In most of these homes the original batts have compressed and heat-cycled for decades, and many now read well below their labeled R-value. We air-seal the ceiling plane and top plates first, repair or add baffles, then bring the attic up to a desert-appropriate R-value with blown material.

Attic Baffles & Ventilation Prep in Sunrise Manor
Many Sunrise Manor tract subdivisions were built with minimal attic ventilation that can’t purge 150°F-plus summer attic air. Adding insulation over a trapped-heat attic just cooks the new material alongside the old. We inspect baffles and soffit vents first and fix airflow before a single batt goes in, because ventilation is the prerequisite, not the afterthought.

Blown-In Attic Insulation in Sunrise Manor
For Sunrise Manor homes with degraded or unevenly settled batts, blown-in fiberglass or cellulose fills the gaps and reaches a consistent R-value across the whole attic floor. We use GreenFiber and Owens Corning materials. Every blown-in job here includes air sealing as part of the scope, never as an add-on, because blowing over unsealed top plates and can lights wastes the material.

Attic Insulation Replacement in Sunrise Manor
In the oldest 1960s – 70s Sunrise Manor homes, the original batts are sometimes so compacted and contaminated that removal makes more sense than a top-up. We document what’s there with photos, remove the old material, air-seal, then re-insulate to a clean R-value. You see the before and after, not just a promise.
Trusted Brands We Service in Sunrise Manor
We install Owens Corning, GreenFiber, and Icynene materials, and we’re not locked into any single product line. That means the material spec on your Sunrise Manor estimate is chosen for the attic we actually find, not for a warehouse we’re trying to clear. Independent local professionals we connect you with source these brands through their own supply, so turnaround in Sunrise Manor stays quick without a proprietary product markup.
Common Attic Insulation Problems We See in Sunrise Manor Homes

- Heat-degraded, compressed batts. Builder-grade fiberglass in Sunrise Manor attics has spent years under 140 – 150°F temperatures, and much of it reads far under its labeled R-value. The material looks fine from the hatch and performs nothing like its sticker.
- Minimal original attic ventilation. Many newer tract subdivisions in 89110 were finished with vents that can’t purge summer attic heat, so insulation added alone can’t hold its performance. Fix the airflow first.
- Unsealed top plates and ceiling penetrations. Gaps around can lights and top plates let 150°F attic air leak into living space and push west-facing rooms hot all afternoon, undercutting an otherwise adequate R-value.
- No basement buffer. Slab-on-grade construction throughout Sunrise Manor means the attic and exterior walls carry the whole envelope load, which makes attic performance here matter more than in homes with a conditioned basement.
Pricing for Attic Insulation in Sunrise Manor, NV
A typical attic insulation top-up in Sunrise Manor runs $1,400 – $3,200, depending on attic square footage, how much old material has to come out, and how much ventilation prep is needed. A full replacement with removal in the older 1960s – 70s homes usually lands $2,800 – $5,500. Air sealing and baffle work, when it’s part of the scope, typically adds $600 – $1,500. These are real Sunrise Manor numbers, not a national average, because the 89110 job mix skews to top-ups and ventilation repairs rather than new installs. Every job starts with a written price before any work begins, and estimates are free.
We Also Serve Cities Near Sunrise Manor

We work across the east Las Vegas Valley, including Sunrise Manor, Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just across a boundary line, the same written-price, documented-record process applies. Call and we’ll confirm your address is in the service area before we quote.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Attic Insulation in Sunrise Manor

Because builder-minimum insulation and minimal ventilation don’t hold up in this climate. Even a 2000s-era Sunrise Manor tract home was usually finished with fiberglass batts and vented attic airflow sized for a milder market; after years of 140°F-plus thermal cycling, those batts read well below their label while the original vents can’t purge the heat. An upgrade here is about fixing what the builder left, not starting from scratch.
No. In Sunrise Manor the job is heat-gain defense, not winter warmth. Summer design temperatures push past 110°F and attic air can exceed 150°F, with intense solar load on west-facing walls and large day-night swings. Insulation here blocks radiant heat from cooking the living space below, which is a different problem than heat retention in a cold-climate home.
Because adding insulation over a trapped-heat attic just cooks the new material alongside the old. Many 89110 subdivisions were built with vents that can’t clear 150°F-plus summer attic air, so a proper job repairs or adds baffles and soffit airflow first, then insulates. Skip that step and the added R-value won’t hold its performance through a single summer.
Not without air sealing first. Blowing over unsealed top plates and can lights in a Sunrise Manor attic lets the hot attic air leak straight through the new material, and the west-facing rooms stay hot. The right sequence is seal the ceiling plane, fix ventilation, then blow in new insulation to a consistent R-value across the whole attic floor.
Owens Corning and GreenFiber are the most common for blown-in top-ups in Sunrise Manor, with Icynene available when a home needs an air-sealing foam component. We’re not locked into a single product line, so the material is spec’d to the attic we find. Bring a competing estimate and we’ll read it with you, free.
If your Sunrise Manor attic is still running hot in the afternoon, call (833) 630-4008 for a free estimate. A live person answers 24/7, every job starts with a written price before any work begins, and you walk away with a photo record of exactly what changed. Under the 365-Day Done Right Promise, if it’s not done right, we make it right.
Written by the team at Envelope Insulation Co.